Elekit TU-8840
back to category
from € 940.23
Contact us for the prices of this product.
from € 777.05
excl. VAT
Contact us for the prices of this product.
Description
Elekit TU-8400 is a DIY kit of a pentode single ended power amplifier.
Thanks to two operation modes and Active Automatic Bias circuit, you can use it with plenty of different power tubes like 6V6, 6F6, 6L6 series, KT88, KT90, EL34 (6CA7), 5881, 6550, as well as KT120, KT150 and even KT170.
This model is dedicated to be used with preamplifier, although front-panel located input is equipped with additional preamp module which allows to use it with your phone or portable music player.
The kit itself contains all elements including enclosure but except tubes.
| Voltage amp tube | 12AX7 (ECC83, 7025) x 1 |
| Output tubes | [HIGH mode]: 6L6 series, 5881, 7581, KT66, KT77, EL34 (6CA7), WE350B, 6550, KT88, KT90, etc. KT120, KT150, KT170, etc. can also be mounted, though the safety cover will not be possible to be installed. [LOW mode]: 6V6, 6F6, etc. |
| Circuit configuration | Output stage A-class, Single-ended, Active Automatic BIAS (low-dissipation automatic biasing) AC heater power B-power : MOSFET ripple filter (right and left channel independently, with fuse) Internal preamp at INPUT-2 : Preamp with OPamp (NJM2068DD) |
| Max. output | [HIGH mode]: 2 x 9,8 W (KT170), 2 x 8,6 W (KT88), 2 x 8 W (EL34), 2 x 7 W (6L6) [LOW mode]: 2 x 3,3 W (6V6), 2 x 2,6 W (6F6) Measured on UL mode, 8 Ω load, THD 10 % |
| Rated input | [INPUT-1]: 850 mV RMS [INPUT-2]: 225 mV RMS (in HIGH mode, UL, EL34) |
| Frequency response | 20 – 50000 Hz (-3 dB, UL) |
| Residual noise | 27 μV RMS (IHF-A, 8 Ω load, UL, HIGH) |
| Input terminals | [INPUT-1]: RCA jack (back side), input resistance approx. 50 ㏀ [INPUT-2]: 3,5mm 3-pole mini jack, input resistance approx. 12 ㏀ |
| Output terminals | Biding terminals, gold plated, banana plugs compatible. |
| Headphone output | 3-pole standard (diameter 6,3 mm) jack |
| Speaker impedance | 4 – 16 Ω |
| Heapdhone impedance | 8 – 600 Ω (corresponds to high impedance headphones as well), unbalanced |
| Power voltage | AC 110 – 120 V or AC 220 – 240 V, 50/60Hz IEC standard 3P inlet type |
| Rated power consumption | HIGH mode, KT170: 80 W HIGH mode, EL34: 71 W LOW mode, 6V6: 36 W |
| Dimensions | 252(W) x 286(H) x 286(D) mm (with safety cover, incl. projections) |
| Weight | Approx. 6,6 kg (assembled, excluding tubes and AC cord) |
